Adhensive backing aluminium foil tape

Specifications 1)good adhesion

2)high peel adhesion

3)high temperature - resistance

4)thickness customized

Aluminium Foil tape   A nominal 30 u to 75u silicone release coated Aluminum Foil backing, combined with a high performance rubber resin adhesive  FEATURES:   Aluminum Foil Tape Without Liner makes easy application. Aluminum backing provides excellent reflection of both heat and light. High quality adhesive with strong adhesion and holding power offers permanent sealing and bonding on Foil-Scrim-Kraft Facing joints and seams in HVAC ductwork application. Good aging resistance both indoors and outdoors. Low moisture vapor transmission rate offers excellent sealing and patching performance.    TYPICAL PHYSICAL PROPERTIES

PROPERTIES	METRIC	ENGLISH	TEST METHOD
Backing Thickness	30/40/50/75 Micron	1.2/1.6/2.0/3.0 Mil	PSTC-133 / ASTM D 3652
Total Thickness	65-110 Micron	2.6-4.4 Mil	PSTC-133 / ASTM D 3652
Adhesion to Steel	15 N/25mm	54 Oz./In.	PSTC-101 / ASTM D 3330
Tack Rolling Ball	15 cm	6.0 In.	PSTC-6 / ASTM D 3121
Tensile Strength	45-95 N/25mm	10.0-21.5 Lb/In	PSTC-131 / ASTM D 3759
Elongation	3.5 %	3.5 %	PSTC-131 / ASTM D 3759
Service Temperature	-30 ~ +120 °C	-22 ~ +248 °F	------------
Applying Temperature	+10 ~ 40 °C	+50 ~ +105 °F	------------

  TYPICAL APPLICATIONS: HVAC industry for joining and sealing Foil-Scrim-Kraft Facing laminated fiberglass blanket / duct board joints and seams; joining and sealing flexible air duct seams and connections. General purpose holding, patching, sealing and masking applications indoors and outdoors.   PRODUCT FORM & SIZE AVAILABLE ROLL WIDTH:  48 / 50mm (2") / 60 / 63mm (2.5") / 72 / 75mm (3") / 96mm / 100mm (4") ROLL LENGTH: 50M / 100M / 150M / 200M / 250M / 300M   IMPORTANT NOTE   1. The data above are typical values only, and should not be used for specifications purpose. 2. Tolerance: Weight and Thickness: ±10%; Width: ±3mm; Length: Cut Roll: ±0.3m, Jumbo Roll ±0.5%. STORAGE & SHELF LIFE: 12 months when stored at 21°C (70°F) / 50% relative humidity out of direct sunlight. PRODUCT USE: It is essential that the user evaluate the BondTape product to determine whether it is fit for a particular purpose and users method of application. Good results will be obtained when applied to a clean, dry surface with a suitable pressure on BondTape products between +10 ~ +40°C (+50 ~ +105 °F).  

Contact us if you need more details on Aluminium Foil Tape. We are ready to answer your questions on packaging, logistics, certification or any other aspects about Easy Release Aluminium Foil Tape Factory、Conductive Adhesive Aluminum Foil Tape. If these products fail to match your need, please contact us and we would like to provide relevant information.

Product Categories : Aluminum Foil Tape